Fisher Snowplows: HD Series

Fisher Snowplows HD Series

Plowing snow for a living is one of the toughest businesses you can be in. The snowplow you choose must be strong enough to take a real beating. You can't go up against brutal winter weather with unproven, lightweight equipment.

Built for the business of snowplowing, the rugged Fisher® HD Series plows will withstand the rigors of any and all commercial applications. These popular 8', 8'6" and 9' plows are the choice of the plowing professional. Designed for 3/4 and 1 ton four-wheel drive trucks, as well as today's new 15,000 GVW "Super Duty" vehicles, these blades are 29" high and built with heavy 11 gauge steel. The trip-edge is backed with a reinforced cutting bar at the bottom to increase wear resistance.

Accessories

Fisher Snowplows HD Series

Key accessories available for the HD blade include a steel cutting edge made of 1090 high carbon steel to improve cutting power and scraping ability and the Fisher® SnoFoil to funnel snow to the side.

A steel or 2-ply rubber deflector is also available to extend the height of your blade so snow stays off your windshield and away from the radiator.

Typical Vehicle Applications

Chevy/GMC K2500, K3500, C3500 & C3500 HD
Ford F250 SD, F350 SD & F450 SD
Dodge W2500 & W3500
Mitsubishi FG

Specifications

FISHER HD 7'6"
Blade Height: 29"
Blade Gauge: 12
Trip Springs: 3
Ribs: 8
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 6'7"
Approx. Weight Complete: 630#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): standard
Cutting Edge: 3/8" x 6" or 1/2" x 6"

FISHER HD 8'
Blade Height: 29"
Blade Gauge: 11
Trip Springs: 4
Ribs: 8
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'1"
Approx. Weight Complete: 717#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): standard
Cutting Edge: 1/2" x 6"

FISHER HD 8'6"
Blade Height: 29"
Blade Gauge: 11
Trip Springs: 4
Ribs: 8
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'6"
Approx. Weight Complete: 731#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): standard
Cutting Edge: 1/2" x 6"

FISHER HD 9'
Blade Height: 29"
Blade Gauge: 11
Trip Springs: 4
Ribs: 8
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'11"
Approx. Weight Complete: 745#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): standard
Cutting Edge: 1/2" x 6"

All plows include: Low-profile, dual beam halogen headlamps with combination park/turn signal lights that conform to federal safety standards and E-Force Isolation Module for improved long term performance of the light system. Vehicle light switch activates plow lights — no separate in-cab switch is needed.

More Information

Contact us for more information about the Fisher HD Series snowplow.