Fisher Snowplows: XBLADE

Fisher Snowplows XBlade

You won't find a commercial or municipal use snowplow built any tougher than this. Combine our exclusive X-BRACING design with premium, corrosion resistant stainless steel, and you get a snowplow that's as rugged as it is striking! Available in 7'6", 8', 8'6" and 9' blade sizes.

Built for the business of snowplowing, the rugged Fisher® XBLADE snowplow will withstand the rigors of any and all commercial applications. These popular snowplows are the choice of the plowing professional, designed for 3/4 and 1 ton four-wheel drive trucks, as well as today's new 15,000 GVW "Super Duty" vehicles. The trip-edge is backed with a reinforced cutting bar at the bottom to increase wear resistance.

Side View

Fisher Snowplows XBlade

A: Xtreme 31" blade height plows through the deepest snow.

B: Xtreme 75 attack angle for better ice breaking and scraping.

C: Xtreme blade curl and 10" moldboard "overhang" promotes optimum snow rolling and "foiling" action to keep plowed snow off the windshield.

D: Optional combination wear and curb shoe helps reduce blade wear especially when scraping against curbs.

Rear View

Fisher Snowplows XBlade

E: Exclusive X-BRACING provides superior torsional strength and rigidity to eliminate moldboard stress.

F: 12 gauge polished 304 stainless steel moldboard is bolted on top with stainless steel fasteners and mechanically interlocked on bottom to a powder coated steel structure for a truly rust free snowplow blade. Powder coated 12 ga. steel moldboard is also available.

G: Contains 1" base angle pins for added strength, and longer life.

H: Higher vertical compression spring attachment location for increased ground clearance and wear resistance.

I: Xtreme "double angle" base angle design provides superior strength and rigidity to eliminate stress.

Optional (not shown) 6" center punched reversible cutting edge helps increase wear resistance and promote increased base angle life.

Typical Vehicle Applications

Chevy-GMC K2500, K3500, C3500 & C3500 HD
Ford F250 SD, F350 SD, F450 SD & F550 SD
Dodge Ram 2500 & 3500

Specifications

FISHER XBLADE 7'6"
Plow Type: Extreme Duty
Blade Width: 7'6"
Blade Height: 31"
Blade Gauge: 14
(Available with 304 stainless or carbon steel moldboards)
Trip Springs: 4
Ribs: 10
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 6'7"
Approx. Weight Complete: 742#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): optional
Cutting Edge: 1/2" x 6"

FISHER XBLADE 8'
Plow Type: Extreme Duty
Blade Width: 8'
Blade Height: 31"
Blade Gauge: 12
(Available with 304 stainless or carbon steel moldboards)
Trip Springs: 4
Ribs: 10
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'1"
Approx. Weight Complete: 790#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): optional
Cutting Edge: 1/2" x 6"

FISHER XBLADE 8'6"
Plow Type: Extreme Duty
Blade Width: 8'6"
Blade Height: 31"
Blade Gauge: 12
(Available with 304 stainless or carbon steel moldboards)
Trip Springs: 4
Ribs: 10
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'6"
Approx. Weight Complete: 813#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): optional
Cutting Edge: 1/2" x 6"

FISHER XBLADE 9'
Plow Type: Extreme Duty
Blade Width: 9'
Blade Height: 31"
Blade Gauge: 12
(Available with 304 stainless or carbon steel moldboards)
Trip Springs: 4
Ribs: 10
Angling Rams: 1 1/2" x 12"
Plowing Width (full angle): 7'11"
Approx. Weight Complete: 835#
(plus vehicle mount - average 60#)
Wear Shoes (cast iron): optional
Cutting Edge: 1/2" x 6"

All plows include: Low-profile, dual beam halogen headlamps with combination park/turn signal lights that conform to federal safety standards and E-Force Isolation Module for improved long term performance of the light system. Vehicle light switch activates plow lights — no separate in-cab switch is needed.

More Information

Contact us for more information about the Fisher XBLADE snowplow.